Having the knowledge of measuring a pillow allows you to understand the exact dimensions you require in a pillow. It basically assists you in getting the exact pillow size you want. Pillow measurements are also important for purchasing the right size pillow covers. Here is how you can measure a pillow in the right way:
•Pillows cannot be measured using a ruler because they are 3D. You would require using a retractable tape or a measuring tape. The latter would be a more comfortable choice because it may be difficult to hold a retractable tape in its place. If you don’t have any choice other than you pick a retractable tape, then you could always take help.
•Pillows come with a top and a bottom. Most people don’t realize this because they seem to be round on both sides. You must locate the bottom of the pillow to be able to measure the exact size. Look for the seam that is sticking out from the rest. If the pillow has some detailing on the out, then look for an overlapping seam. This seam side is the bottom of the pillow and the opposite side is the top.
•The distance from the top to the bottom should be measured first – this is the height of your pillow. Make sure you have zero on the top seam and then take the measuring tape to the bottom seam. The number you get on the bottom is the height. You may not get an exact number, but you can round it off to the nearest number.
•Width is the measurement taken from left to right. Keep zero on the left seam and take the measuring tape to the right on the seam. Record the number just as you did for the height.
•The height is written first, and width comes second. So, for instance, if your height measurement is 20 inches and the width is 30 inches, then the dimension of the pillow should be written as 20 inches x 30 inches or 20” x 30” or 51 cm x 76 cm.
Comments (0)